The average electric bill in Florida is about $125 per month, according to the U.S. Energy Information Administration. No wonder you are looking for ways to reduce your energy consumption and bring down your bill.

If you already have all of these covered, try calling a professional electrician in Mulberry for even more options.

Phantom Draw on Your Electric Bill

One of the easiest ways to reduce your energy consumption is to reduce your phantom consumption. But what is phantom consumption?

Simply put, phantom consumption is when you are using electricity without getting anything back in return. Think about all the charging cable you have plugged in that aren’t actively charging anything. Also, think about things you are charging, but you leave on the charger after they are fully charged.

Next, think about things like your computer that you may leave on all the time but are not always using it. Unplug and turn them off, this is an easy way to reduce your energy bill.

Hit the Lights

Think back to your childhood and your parents telling you to turn off the lights, and with good reason. You can easily manage your lights with smart switches or motion sensor switches.

In addition to turning off lights you are not using, consider changing your bulbs. The best bulbs for energy are LED. These last the longest, reducing your replacement costs. However, they also use the least energy over time, further reducing your bill.

Check for Leaks

You may not realize it, but your house has energy leaks, which drives up your electric bill. These are usually found in three areas: your doors, your windows, and your ceiling.

A professional energy audit will use thermal imaging to identify where your heating or cooling is leaking. If you have older windows, you may want to consider installing energy-efficient windows with fiberglass frames. The glaze you put on can make a huge difference as well. Some glazes you might want to consider include ultraviolet, mirror, or Low-E glazing.

Make the Most of Each Load

Homeowners in Mulberry can waste a lot of energy by running the dishwasher or laundry with less than the optimal load. Now there is a balance to be struck when it comes to the load size you run. For instance, if you load too many dishes into your dishwasher, you can prevent it from cleaning the dishes properly. This would increase the number of cycles to run to get your dishes clean.

Likewise, when it comes to your laundry, putting too much in the washer can extend the number of drying cycles. However, putting too few clothes in will also increase the total number of cycles you have to run. So strike the balance of running nearly full but light enough that it is a single dry cycle.

Check Your Thermostat

It is no secret that cooling bills in Florida could fund some small island countries. However, there are some things you can do to help reduce the impact. The easiest thing you can do is set your thermostat at a comfortable temperature and just leave it. For an extra step of savings, keep your thermostat set for about fifteen degrees lower than the high for the day.

Your Next Move

You should always contact a licensed electrician whenever you consider upgrading or repairing anything electrical. Electricity is nothing to play with, and attempting to fix a problem on your own could worsen your issue or create a bigger problem than you know how to fix. When it comes to installing dedicated circuits, you want to make sure the process goes smoothly and causes no issues.

At D.O.C. Electric Inc., we have the know-how to assist you. We’ll send out a professional electrician to help you figure out which appliances deserve dedicated circuits so that you can configure the electricity of your home more efficiently and logically. To get in contact with an electrician today, contact us, and we’ll help you get your circuits sorted out.